EMV1200 FHD / EMV800 FHD Hybrid Mobile DVR
49
4.5
Sequence
The sequence function is used to display each channel in sequence order with a pre-setup dwell
time. The system will display one channel at a time in full screen. Dwell time of each channel is
set up with 3 seconds by default. Please refer to
6.5.2 Sequence
for detailed information.
To perform the Sequence function:
1.
Configure the Sequence settings in advance (refer to
6.5.2 Sequence
).
2.
To activate the Sequence function, on the OSD Root Menu, click the
Sequence
button
.
To stop the Sequence function, click the
Sequence
button again.
4.6
Zoom
You can zoom in the camera view up to 4X and navigate the camera view using the mouse.
Zoom: 2 X
To enter the Zoom mode:
1.
Select a camera by clicking on the channel and then click the
Zoom
button
on the OSD
Root Menu to zoom in the camera view to 2X. The Zoom 2X stamp will be displayed on the
top screen.
2.
Navigate the camera view to the desired position by moving your mouse cursor over the
camera view. The mouse cursor will turn into a direction icon when you move your mouse
cursor to different portion on the camera view. Click directly on the screen can move to that
direction.
