EMV1200 FHD / EMV800 FHD Hybrid Mobile DVR
153
7.3.4.3 Mobile
After connecting the 3G / 4G Antenna to the mobile DVR, you have to set up the mobile
settings for the mobile DVR to connect to the wireless network. Follow the steps below:
1.
Connect the 3G / 4G Antenna to the mobile DVR. Please refer to the
User’s Manual
of the
3G / 4G Antenna Module
.
2.
Select
On
from the GPRS Service drop-down list and select an authentication (
CHAP
or
PAP
).
3.
Insert the APN, Phone Number, User Name and Password provided by the network service
provider and then click the
Save
button. The connection status will be displayed in the
Status
field below.
Status: If the connection is established, the status will display “Success”.
Date Rate: If the connection is established, the Data Rate information will be displayed.
ISP: Displays the information of internet service provider.
Type: Displays the network type, such as 3G or 4G.
Signal: Displays the signal strength (0~98). The higher the value, the stronger the strength.
4.
You can now use the IP for remote access to the mobile DVR.
Note:
If “Please insert a 3G modem” message window pops up, please reboot the mobile DVR.
