TCP/IP Network Access Controller
87
Operation Procedures:
1)
Input the name of a new design in the textbox of “Schedule Name.”
2)
Click the time period of “Datesetting,” a dialog box will pop up, in which the time
period and the door entry/exit authentication authority can be set; see Figure 12-9.
3)
After setting the authentication mode of various date types, click the “Save” button,
then the new design is added into the control group scheme list.
12.3.2
Delete Group Schedule
Operation Procedures:
1)
In the Group Schedule setting page, check the items to be deleted.
2)
Click the “Delete” button.
3)
The confirmation box “Confirm delete?” pops up.
4)
Click “OK,” then the selected control group is deleted.
12.3.3
Set Group Schedule
Click one group schedule in the group schedule list and click the “Edit” button to enter the
group schedule setting page; see the figure below:
Figure 12-8 Edit control group scheme
By default, the date time periods allow free entry/exit. In case it is required to respectively
set the date time periods in the schemes, in the control scheme setting page, left click
“Datesetting” in the selected date type, then the following time period setting page pops
up:
Figure 12-9 Set time period and authentication mode
