EverFocus 920, Instruction Manual

Page: 44 / 162

34
4. WATER MARK:
ON: Recording is overlaid by a visible watermark (“W”) .
OFF: No watermark.
5. RESOLUTION: The resolutions for NTSC are 720x480, 720x240 and 360x240. The default
value is 720x240. The resolutions for PAL are 720x288, 720x576 and 360x288. The default
value is 720x288.
Note: Selecting a certain resolution will determine the amount of IPS the DVR will support.
NTSC
720x480 = 120 IPS (EDR1640) or 60 IPS (EDR1620/920)
720x240 = 240 IPS (EDR1640) or 120 IPS (EDR1620/920)
360x240 = 480 IPS (EDR1640) or 240 IPS (EDR1620/920)
6. RECORD MODE:
REWRITE: Continue recording. Disk will begin overwriting when it is full.
STOP: Stop recording when disk is full.
7. AUTOWRITE WITHIN: You can set DVR to automatically overwrite after the selected
number of days. If you do not wish to use this function,
simply select “0” .
8. PRE-ALARM RECORDING
Select “YES” to enable pre - alarm recording function. Select “NO” to disable pre-alarm
recording function.
9. RELAY OUT
By selecting “ 1 ”, user can easily identify whether DVR is recording or not if relay output is
connected to a signaling device. Select “ NONE ” if you do not wish to identify recording
status.