Assembly
12
Step 4 – Connect Inlet, Outlet, and Bypass Hoses
Use a hose clamp (not provided) and connect a flexible hose (not
provided) to the regulator’s bypass port. The hose should return
to the pump’s water supply. See the Operation section of the
manual for detailed information about the regulator’s bypass
function.
Use hose clamps (not provided) and connect flexible hoses (not
provided) to the pump’s inlet and outlet ports. See the
Installation section of the manual for more detailed plumbing
requirements.
Tools Needed
Flat blade
screwdriver
1/2” Inlet hose
(from water supply)
1/2” Inlet hose
(from water supply)
3/8” Outlet hose
1/2” Bypass hose
(return to water supply)
* Hoses and Hose Clamps are not provided
Regulator
bypass port
Hose clamp
