Assembly
11
Step 3 – Regulator Installation
Install the regulator into outlet port at the top right side of the
pump manifold.
o
Use flat blade screwdriver to remove QC clip from the
pump before installing fitting. Snap QC clip back into
pump after fitting is inserted.
Note: The pump is configured for installing the regulator in the
right side of the manifold. If the left side is preferred, the QC
plug must first be moved from the left side outlet port to the
right side outlet port.
Tools Needed
Flat blade
screwdriver
QC Clip
Regulator assembly
Outlet port
QC Plug
