Assembly
9
Step 1 – Inlet Fitting Installation
Install (1) QC x 1/2” HB elbow fitting into the pump inlet port on the
bottom left side of the pump manifold.
Install (1) QC x 1/2” HB elbow fitting into the pump inlet port on the
bottom right side of the manifold.
o
Use a flat blade screwdriver to remove QC clip from the pump before
installing fitting. Snap QC clip back into pump after fitting is inserted.
Note: The pump is configured for installing (2) QC x 1/2” HB elbow fittings
into the pump inlet ports on the bottom of the manifold. If preferred to
use only one pump inlet port, there is an extra QC plug in the manual
bag that can be installed to plug the desired port.
Tools Needed
Flat blade
screwdriver
Pump inlet
QC x 1/2” Elbow
Inlet fitting
QC Clip
QC x 1/2” Elbow
Inlet fitting
Pump inlet
QC Clip
QC Clip
Pump port
Insert screw-
driver here to
remove QC clip