146
command received over either the serial port or the MIDI In port causes the port
not
receiving the command to be ignored until
the command is complete.
The pin-out for the serial port is:
1 DCD
2 RXD
6 DSR
3 TXD
7 RTS
4 DTR
8 CTS
5 gnd
9 nc
For most applications, only pins 2, 3, and 5 need to be connected.
Dumping Data and Receiving Data Dumps
You can "dump" data from the H8000FW for
external storage or for use in another
H8000FW. To dump, go to the
dump
menu
page in the
SETUP
area. The dumped data will
be system exclusive and will be sent out the MIDI Out port and the serial port. None of
the MIDI parameters on the
midi
menu page in the
SETUP
area has any bearing on
dumps except for the
device ID
. The
device ID
is used as part of the system exclusive
messages in the dump. While the dump is occurring, a running display of the number of
bytes sent is presented for those keeping score at home. You can reload the dumped
information into the H8000FW by presenting it at the MIDI In port or the serial port
(provided
system exclusive
is set to
on
and
MIDI
is set to
enabled
on the
[midi]
menu page in the
SETUP
area)
.
Let’s look at the five "types" of dumps
.
dump program
This function dumps the currently running program on the DSP
referred to by the upper left-hand corner of the screen(
press the
DSP A/B
key to toggle the display
). If received at the MIDI In port or at the serial
port, the H8000FW will load the received program into the currently
displayed DSP (
press the
DSP A/B
key to toggle the display
).
dump setup
This function dumps the state of the H8000FW, covering all of the
parameters covered in the SETUP area except for routings.
Summary of Contents for H8000FW
