manualshive.com logo in svg

EVBox Elvi, Installation And User Manual, Page: 30 / 38

Share
Download
EVBox Elvi Installation And User Manual Download Page 30

LED ring color

What it means

What to do

LED ring yellow.

The car is fully

charged.

• Stop the charging session using the

authorization method used for activation

(for example, charge card or key fob).

• Unplug the charging cable.

LED ring flashing

yellow.

Charging session is in

queue (applicable for
Smart Charging only).

When power becomes available, charging will

start or resume and the LED ring will show blue.

LED ring red.

An error has occurred.

Check

Troubleshooting on page 26

for a

solution.

LED ring flashing red.

The charge card or

key fob is not

authorized.

• Authorize the user. See

Configure the user

settings on page 23

.

• Contact the charge card service operator if

necessary.

• A Satellite charging station has become

disconnected from the Hub charging

station.

A Satellite charging
station has become
disconnected from the
Hub charging station.

Check the Hub-Satellite pairing. See

Configure a

Hub-Satellite installation on page 24

.

LED ring flashing

purple.

The Hub charging
station is in Bluetooth
pairing mode and
ready to pair with the
EVBox Connect app.

See

Pairing on page 22

.

A Satellite charging
station is selected in
the the EVBox
Connect app for
pairing to the Hub
charging station.

See

Configure a Hub-Satellite installation on

page 24

.

5.2. Troubleshooting

Troubleshooting must only be done by a qualified electrician unless otherwise stated. Incorrect
installation, repairs or modification can result in danger to the user and may void the warranty and

EN

5. Operation instructions

26

Summary of Contents for Elvi







































Reviews:

No comments