TE200S User manual
iv
EUROPEAN DIRECTIVES
CE MARKING AND SAFETY
TE200S products carry the CE mark in compliance with the essential requirements of the
European Low Voltage Directive 73/23/EEC of 19/2/73 (amended by the Directive
93/68/EEC of 22/7/93).
For safety reasons, TE200S products installed and used in compliance with this User Manual
meet the essential requirements of the European Low Voltage Directive mentioned above.
ELECTROMAGNETIC COMPATIBILITY (EMC)
For an industrial environment only, must not be used in domestic environments.
Eurotherm certifies that TE200S products, installed and used in compliance with these
Instructions, meet the following EMC standards and enable the system which incorporates
them to comply with the EMC Directive, as far as the TE200S products are concerned.
EMC test standards
Immunity
Generic standard
:
EN 50082-2
Test standards
:
EN 61000-4-2, EN 61000-4-4, EN 61000-4-3,
EN 61000-4-6,ENV 50204
Emission
Generic standard
:
EN 50081-2
Test standard
:
EN 55011 Class A
Product standard
:
IEC 1800-3 second environment (industrial environment)
Internal EMC filters
EMC filters are incorporated in the TE200S to reduce conducted emission in accordance with
the corresponding test standard.
EMC Guide
In order to help reduce the effects of electromagnetic interference depending on the
product installation, Eurotherm can supply the 'Electromagnetic Compatibility' Installation
Guide (ref: HA 025464).
This guide lists the rules generally applicable for EMC.
Summary of Contents for TE200S
Page 40: ......
