Eurotherm TC3001, User Manual

Page: 41 / 79

Transit Inspector Pro 42
Administrating Module
User Guide
4. Create Sensor object (see 4.2.3 Transit: number recognizer on page 25 ) and define
Alarm
condition on train passing by (on sensor applying for train partition).
5. Create Database object (see 4.2.2 Database on page 24 ). Define database for recognized number
records and retention period optionally.
6. Create the Transit: number recognizer object (see 4.2.3 Transit: number recognizer on page 25 )
with the following parameters:
•
Analyse video from camera
→
define the corresponding Camera object.
• Synchronously record video from cameras → define additional cameras to record video.
•
Video recording mode
→ select the proper recording mode.
•
Recognize numbers of wagons incoming from
→
select the proper checkboxes due to
the task.
•
Redirect results to
→ define the Database object or enable the
Consolidator
field if the
current recognizer is not a main one.
• Number detection and speed estimation → type in manually or set by the utility
(see 4.2.3.2.1 Visually Setup Recognizer Parameters Utility on page 33 ) the parameters
of number detection area.
7. Create the Transit: assisting recognizer object (see 4.2.4 Transit: assisting recognizer on
page 36 ) with the following parameters:
•
Analyse video from camera
→ define the corresponding Camera object.
•
Synchronously record video from cameras
→
define additional cameras to record video.
• Video recording mode → select the proper recording mode.
•
Recognize numbers of wagons incoming from
→ select the proper checkboxes due to
the task.
• Redirect results to → define the Database object or enable the Consolidator field if the
current recognizer is not a main one.
•
Number detection and speed estimation
→
type in manually or set by the utility
(see 4.2.3.2.1 Visually Setup Recognizer Parameters Utility on page 33 ) the parameters
of number detection area.
8. Create the Transit: consolidation module object (see 4.2.5 Transit: consolidation module on
page 37 ) with the following parameters:
• Set the data sources.
• Select the
Main
checkbox if the object is a closer one or
Supplementary
— if its results
go to another consolidator.
• Define a database (the Database object) to write results (if the object is set as a main
consolidator).
9. Create Screen object.
10. Create Monitor object. In its properties window click
All
button to assign all cameras to this
monitor. Set the parameters:
www.isscctv.com