Transit Inspector Pro
36
Administrating Module
User Guide
(continued from previous page)
Property
Description
Use ray detectors (reliable)
Select the option to divide train to wagons due to sensors response
(see
on page
). The option is active if there is a
one
Sensor
object in the system. The sensors section
on page
For this method of counting select from the
Left ray
,
Central
ray
,
Right ray
lists an IDs of the corresponding
Sensor
object.
Define sensors position (in meters) relative to the frame center.
Note:
if it is necessary to take into account a train maneuvering
choose the
Manoeuvring support
checkbox.
Car counting using visual
estimation (less reliable)
Select the option to divide train to wagons due to video processing.
The methed is less reliable in compared with ray detectors using.
Note:
it is not recommended to use this method if the
Transit:
consolidation module
will be used.
Camera distortion compensation
Deskew video stream
Choose the checkbox to eliminate the distortions (see below).
Start calibration utility
Click the button to run the calibration utility to eliminate the dis-
tortions (see
Appendix C: Camera Calibration Utility
on page
Load settings
Click the button to load camera calibration parameters from file.
Minimal train passing
interval
Minimum time interval between trains passing in seconds.
Note:
To trace a train maneuvering the corresponding position should be mentioned in license key file.
4.2.4
Transit: assisting recognizer
The object is used when several recognizers are working, it works with the
Transit: number recognizer
object/objects, see
4.2.3 Transit: number recognizer
on page
. Also the object can be used when
not only the tanks but platforms are passing through the camera view. In this case it is possible to
set camera of the main recognizer to fix tanks numbers and camera of the assisting one — platforms
numbers.
Note:
The
Transit: assisting recognizer
object purpose is similar to the
Transit: number recognizer
object. However it cannot exchange events with SecurOS, so cannot write recognition results to database.
www.isscctv.com
Summary of Contents for TC3001
Page 1: ...User Guide ...
