Eurotherm TC3001, User Manual, Page: 69 / 79

Transit Inspector Pro 70
Appendix C: Camera Calibration Utility
User Guide
2. Find a straight line on the original image and clicking on it set several points.
Note:
For point position straight for the line one may use help buttons on the utility toolbar (see
figure 38 ).
3. Repeat items 1 – 2 if it is necessary (for each line).
4. Click Calibrate button to define the calibration parameters automatically.
On finishing the calibration process the
Pincushion
and
Corners
parameters (
Distortion
tab) will be
set automatically.
Note: Only Pincushion and Corners parameters are defined automatically; the other ones are not
changed but its values are allow for definition process.
To remove a line from the list,
select it and click Remove line button.
www.isscctv.com