Transit Inspector Pro
56
Working with Module
User Guide
2. Select required direction check box/boxes.
3. Click
Search
button to begin search.
To search for carriage number by number:
1. Define the whole carriage number (or a part of it, see
on page
for more
information) in
Wagon number
field.
2. Click
Search
button to begin search.
To browse all database:
1. Make sure that all recognizers are set in
Railways
field (
All railways
message or a list of
recognizer are displaying). If it is needed add other manually.
2. Set total recognizer working time in
Time
field.
3. Make sure that all directions are set in
Directions
field (
All directions
message or a list of
directions are displaying). If it is needed add other manually.
4. Take
wagon number
field empty.
5. Click
Search
button to begin search.
5.1.2.1
Mask Search
One can set the whole carriage number or part of it in the
Carriage Number
field. On part carriage
number setting unrecognized symbols may be replaced by special symbols.
Table 13
: Symbols for mask search
Symbol
Description
(down accentuation
symbol)
Any figure even unrecognized one (e. g.
514018 6
).
*
(asterisk)
One unrecognized figure (e. g.
50318**1
).
%
(percent symbol)
Any amount of figures till the end of the number (e. g.
50%
or
50318*%
).
5.2
Working in Number Window
Number
window displays recognized carriage number of the active record. This window consist of
the
Number
editable field.
www.isscctv.com
Summary of Contents for TC3001
Page 1: ...User Guide ...
