Transit Inspector Pro
58
Troubleshooting
User Guide
6. Troubleshooting
Question: How can I put previously recorded video in SecurOS interface?
To put previously recorded video in SecurOS interface:
1. Copy file of previously recorded video to the SecurOS folder (e. g.
C:
\
SecurOS
). Rename this
file as
X. Y
, where
X
— integer number from 0 till 31,
Y
— integer number from 1 till 16.
2. Create
Video Capture Device
object (see
) in SecurOS object tree
and set the following parameters:
•
Type
→
select the
Virtual
value from the drop-down list box
•
PCI Channel
→
select the
X
value (see item
). For example, if the file name was
0. 01
,
then one need to set the
0
value.
Warning!
Channel number should not coincide with channels used in other
Video Capture
Device
objects on the same computer, otherwise the video will not be displayed on the video
monitor. In this case rename the file by changing its
X
value to make it differ from any number
of already used channels.
3. Create
Camera
object as a child one for the just created
Video Capture Device
object (see
item
). Define a channel number: set the
Y
value (see item
). For example, if the file name
was
0. 01
, then one need to set the
1
value.
Question: What value must be set for the “Pre-recording phase duration” Camera object para-
meter?
In
Pre-recording phase duration
one need to set an average time of train passing in camera view.
It is recommended to set a value not less than 10 seconds. Setting much more than 10 seconds may
cause system errors.
www.isscctv.com
Summary of Contents for TC3001
Page 1: ...User Guide ...
