Transit Inspector Pro
34
Administrating Module
User Guide
The utility window will appear (figure
Figure 24
: Visually setup recognizer parameters utility window
There is a list of JPEG files in the right part of the window, and the image is displays in the
left one.
Note:
On the utility first run the lines ans rectangle coordinates is set due to the corresponding values
set in the
Transit: number recognizer
object properties window.
4. For each image set the wagon borders position by mouse and wight and height of the number
displayed area (a rectangle area), see figure
5. Mark files to take into account for number displayed area calculus.
Click the
Save & close
to start calculus, save values and close the utility window.
Note:
The setting are saved in the
wagon utility setting.ini
file in the exported files folder (see
item
Click the
Save
button only to start calculus and save values.
Click the
Close
button to close the utility window without saving.
On closing the utility window the values will be set in the corresponding parameters of the object
settings automatically.
www.isscctv.com
Summary of Contents for TC3001
Page 1: ...User Guide ...
