DEFAULT CONFIGURATION
DEFAULT CONFIGURATION
DEFAULT CONFIGURATION
DEFAULT CONFIGURATION
DEFAULT CONFIGURATION
See section B
The instrument can be pre-loaded with factory
default values.
Using the factory default values is ideal for
completely resetting the instrument before
commencing a new configuration.
PARAMETER SECURITY
PARAMETER SECURITY
PARAMETER SECURITY
PARAMETER SECURITY
PARAMETER SECURITY
S
ee page 6 section 4.2, and page 10 section P11
& P14
The instrument is supplied with access to the
main parameters which are required for the set-up
procedure.
After commissioning it is necessary to select the
correct level of Parameter Security, simplifing the
instrument user interface for normal operation.
The most common security setting would be:
P11 = 1
P11 = 1
P11 = 1
P11 = 1
P11 = 1
P14 = Off
P14 = Off
P14 = Off
P14 = Off
P14 = Off
RECOVERY FROM A LOST
RECOVERY FROM A LOST
RECOVERY FROM A LOST
RECOVERY FROM A LOST
RECOVERY FROM A LOST
PASSWORD
PASSWORD
PASSWORD
PASSWORD
PASSWORD
See page 6 section 4.2, and page 10 section P11
& P14
If you lose your password
Enter Configuration using the Master Code of 408
Go to parameter P11 and enter the Master Code
of 408
You can now reset the password.
A. 4
TIMER CONTROL FROM FRONT
TIMER CONTROL FROM FRONT
TIMER CONTROL FROM FRONT
TIMER CONTROL FROM FRONT
TIMER CONTROL FROM FRONT
PANEL KEYS
PANEL KEYS
PANEL KEYS
PANEL KEYS
PANEL KEYS
See page 17 section 5.7
When a timer funtion is configured the
parameter ‘StS’ is enabled.
This parameter functions the same as that
described for a digital input.
‘StS’ = ‘OFF’ means that the time is off
‘StS’ = ‘On’ means that the timer is on.
02_0316_A_DER.pmd
23/04/2004, 10.49
5
