EuroTel ETL3100 Series, Operating And Technical Manual

Page: 76 / 252

ETL3100 Rev. 009
5. Set at least one receiving phone number (phone number that will receive SMS messages from
ETL3100). It is possible to set up to 16 telephone numbers.
→ →
MAIN MENU GSM MENU Set Tel Nb1: x x x x x x x x x x x x x x x x x x x x
6. Disable pin verification of the SIM card and insert the card into the slot on the front panel of ETL3100
Telemetry system of ETL3100 supports GSM standard only. UMTS or other standard are not supported. Telemetry system of ETL3100 supports GSM standard only. UMTS or other standard are not supported. Telemetry system of ETL3100 supports GSM standard only. UMTS or other standard are not supported. Telemetry system of ETL3100 supports GSM standard only. UMTS or other standard are not supported.
Once the GSM module is enabled it is possible to send command via SMS to ETL3100 transmitter unit. To send
a command, write the command as text in a SMS and send it to the corresponding number of the SIM card.
All SMS commands must be written with capital letters. All SMS commands must be written with capital letters. All SMS commands must be written with capital letters. All SMS commands must be written with capital letters.
SMS commands work effectively only if ETL3100 is set in “Remote” operation mode. Otherwise the SMS commands work effectively only if ETL3100 is set in “Remote” operation mode. Otherwise the SMS commands work effectively only if ETL3100 is set in “Remote” operation mode. Otherwise the SMS commands work effectively only if ETL3100 is set in “Remote” operation mode. Otherwise the
commands are ignored. The same applies for ETL0700TA(-02) when present. CMD HELP and CMD STATUS
commands are ignored. The same applies for ETL0700TA(-02) when present. CMD HELP and CMD STATUS commands are ignored. The same applies for ETL0700TA(-02) when present. CMD HELP and CMD STATUS commands are ignored. The same applies for ETL0700TA(-02) when present. CMD HELP and CMD STATUS
commands are enabled even if the ETL3100 is set in “Local” operation mode.
commands are enabled even if the ETL3100 is set in “Local” operation mode. commands are enabled even if the ETL3100 is set in “Local” operation mode. commands are enabled even if the ETL3100 is set in “Local” operation mode.
The list of the available GSM commands is as follows:
COMMAND COMMAND COMMAND COMMAND DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION
CMD HELP CMD HELP CMD HELP CMD HELP Sending this command, ETL3100 returns a SMS with the list of available command
CMD SMSON
CMD SMSON CMD SMSON
CMD SMSON Enable SMS sending
CMD SMSOFF CMD SMSOFF CMD SMSOFF CMD SMSOFF Disable SMS sending
CMD STATUS
CMD STATUS CMD STATUS
CMD STATUS
Request for information about the status of the transmitter system. The information
concern:
- “Temperature” of exciter, supervisor and amplifier modules
- “Ant. Fwd.Power”: forward power at antenna port
- “Ant. Rfl.Power”: reflected power at antenna port
- “Exct On/Off”: On/Off status of the exciter
- “ExctLoc/Rem”: Local/Remote status of the exciter
- “ALC Ref.Power”: ALC reference power value
CMD ON CMD ON CMD ON CMD ON Enables (switch on) the R.F. output of the ETL3100
CMD OFF CMD OFF CMD OFF CMD OFF Disables (switch off) the R.F. output of the ETL3100
CMD REBOOT
CMD REBOOT CMD REBOOT
CMD REBOOT Reboots the ETL3100
CMD REFPWR xxx CMD REFPWR xxx CMD REFPWR xxx CMD REFPWR xxx Sets the ALC Reference Power of the system (e.g. CMD REFPWR 1.0)
CMD TXMAN
CMD TXMAN CMD TXMAN
CMD TXMAN Sets the system in “Manual” operation mode (Only for system including ETL0700TA)
(Only for system including ETL0700TA) (Only for system including ETL0700TA)
(Only for system including ETL0700TA)
CMD TXAUTO CMD TXAUTO CMD TXAUTO CMD TXAUTO Sets the system in “Auto” operation mode (Only for system including ETL0700TA) (Only for system including ETL0700TA) (Only for system including ETL0700TA) (Only for system including ETL0700TA)
CMD EXCITAON
CMD EXCITAON CMD EXCITAON
CMD EXCITAON Enables R.F. output of Exciter A (Only for dual drive system)
(Only for dual drive system) (Only for dual drive system)
(Only for dual drive system)
CMD EXCITAOFF
CMD EXCITAOFF CMD EXCITAOFF
CMD EXCITAOFF Disables R.F. output of Exciter A (Only for dual drive system)
(Only for dual drive system) (Only for dual drive system)
(Only for dual drive system)
Page 76 CMAN3100 Gen 2014