EuroTel ETL3100 Series, Operating And Technical Manual

Page: 248 / 252

ETL3100 Rev. 009
Section F-
Section F- Section F-
Section F-CONNECTORS
CONNECTORS CONNECTORS
CONNECTORS
I -
I - I -
I -Enable IN/OUT DIN socket
Enable IN/OUT DIN socket Enable IN/OUT DIN socket
Enable IN/OUT DIN socket
Table 7: Connections to Enable socket
Collegamenti al connettore d'abilitazione
Figure 36: Enable socket
Connettore d'abilitazione
PIN PIN PIN PIN DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION
1 1 1 1 +15 V enable to external
RF Power Amplifier.
2
2 2
2 Ground.
3 3 3 3 +10 V (nominal) enable
input (“READY”) signal
from external RF Power
Amplifier.
4 4 4 4 Not Connected.
5
5 5
5 Not Connected.
This socket is used:
•
to enable the Transmitter with an external command of +10 V nominal.
•
to co-ordinate the operation of the Transmitter with an external R.F. Amplifier.
Questo connettore è utilizzato:
•
per abilitare il trasmettitore con un comando esterno di+10 V nominali.
•
Per coordinare il funzionamento dell'eccitatore con un modulo PA esterno.
II - II - II - II -SERIAL DATA COM (RS-232) socket SERIAL DATA COM (RS-232) socket SERIAL DATA COM (RS-232) socket SERIAL DATA COM (RS-232) socket
Table 8: Connections to SERIAL DATA RS232 socket
Collegamenti al connettore dati seriale RS232
Figure 37: Serial Data Com in-out socket
Connettore dati seriale porta COMt
PIN
PIN PIN
PIN DESCRIPTION
DESCRIPTION DESCRIPTION
DESCRIPTION
1
1 1
1 Not connected.
2 2 2 2 TX out
3 3 3 3 RX in
4
4 4
4 RX c.er
5 5 5 5 Ground.
6 6 6 6 Not connected.
7
7 7
7 Not connected.
8
8 8
8 TX c.er
9 9 9 9 Not connected.
Page 248 CMAN3100 Gen 2014
1
2
3