background image

RELEASE ER2017_06_23

Installation and maintanance manual

Projector lift 

Mod. SI - 200

This document is property of Euroscreen Srl.

Any distribution, reproduction, copying or publication of this document is prohibited.

IMPORTANT

This symbol is used to indicate recommendations, rules and 

information that every person has to take care during the life 

cycle  of  the  product  (installation,  use,  maintenance,  waste, 

move).

DANGER

This symbol is used in the safety warnings of this installation 

manual,  in  order  to  indicate  behaviours  that  are  absolutely 

forbidden  during  the  use  of  the  lift,  during  maintenance 

operations  or when there are potential dangerous situations 

that can cause serious injury or death.

WARNING

This symbol is used in the safety warnings of this installation 

manual, in order to indicate dangerous situations that in case of 

negligence, can cause limited injuries or damages. The symbol 

can also be used to indicate situations that can damage the lift.

This installation manual is addressed to:

-end user of the product, owner, people in charge of the product;

-people in charge of di disintalling and moving;

-installers;

-users;

-maintanance technicians;

-people in charge for dismatling and wasting. 

The information in this installation manual are aimed to indicate how to use the 

lift and its technical features, how to move, install, set and use the lift.

Moreover,  it  contains  the  instructions  for  personnel  that  will  be  in  charge  for 

maintenance and safety.

In this installation manual, the following symbols will be used:

1.4

 

AIM, CONTENTS AND TO WHOM IT MAY CONCERN  

 

THIS MANUAL

1.5

 

SYMBOLS LEGEND

Summary of Contents for SI-200








































Reviews: