RELEASE ER2017_06_23
Installation and maintanance manual
Projector lift
Mod. SI - 200
This document is property of Euroscreen Srl.
Any distribution, reproduction, copying or publication of this document is prohibited.
WARNING:
in case the installer needs
to modify this end-stop, it is allowed
to lower the closed stop position.
Do
not try to high the upper end-stop
because this will cause severe
damages to the product and
invalidate warranty on the lift.
Turn the screw on the motor shown on
the picture, clockwise to lower the lift.
Turn the screw on the motor, as
shown on the picture, anticlockwise
to increase the bottom stop point and
clockwise to reduce it.
4.6.1
In order to fix the
“UPPER
END POSITION”
4.6
END-STOPS SETTINGS
4.6.2
In order to fix the
“LOWER
END STOP POSITION”
