RELEASE ER2017_06_23
06
05
04
04
This document is property of Euroscreen Srl.
Any distribution, reproduction, copying or publication of this document is prohibited.
Installation and maintanance manual
Projector lift
Mod. SI - 200
The sliding brackets (fig. 01) have to be positioned in the suitable point in order
to fix correctly the false ceiling plate.
After fixing the threaded bars (fig. 04) and defined the right length, the false
ceiling plate can be mounted using two types of screws.
The following drawings describe the two types of installation.
Drill the hole in the plate, fit in the
bush from the bottom side and
screw the threaded bar to it.
Drill a partial hole at the top side
of the plate and screw the blind
screw into it avoiding to go through
the panel.
VISIBLE SCREW
NON VISIBLE SCREW
