RELEASE ER2017_06_23
21281
L
NF
CEBEC
1368
K
EMA
EUR
D E
V
10A / 250
1 2 3
1
3
2
2
2
Blu
Blue
Bianco
White
230v
->
120v
->
Marrone
Brown
Rosso
Red
Nero
Black
Nero
Black
Giallo/Verde
Yellow/Green
Verde
Green
3x1,5 mm2
This document is property of Euroscreen Srl.
Any distribution, reproduction, copying or publication of this document is prohibited.
Installation and maintanance manual
Projector lift
Mod. SI - 200
4.5.2
Use power cable with appropriate section for the motor power. The cable
has to be protected from high temperatures, oils, collisions, crushes and sharp
edges. Check that the mains tension is the same as the one indicated on the
product identification label n. 01 (see 1.8.1).
It is compulsory to connect the electrical connection of the lift also to earth.
4.5.5
Any operation that will involve electrical components has to be carried
out by qualified personnel only, always following the procedure here under:
1) SWITCH OFF THE MACHINE.
2) DISCONNECT THE MAINS BY THE GENERAL SWITCH.
3) DISCONNECT THE LIFT FROM THE MAINS.
4) MAKE THE NECESSARY MAINTENANCE OPERATIONS
4.5.3
Before connecting the lift to the mains, please carefully check the
security safety devices efficiency and the absence of failures or damages.
4.5.4
Please find here under the electrical connection diagram to be used
together with the supplied up/down switcher (see pag. 20 – Fig. C)
