SigNET 200/300 User Guide
ELAB 1543
15
4.10 Allowing
Engineer/Manufacturer Access
When engineer or manufacturer access has been allowed, the Keypad displays
the text ENGINEER ENABLE or MANUFACT ENABLE. Once access has been
granted, the user cannot access the system until the engineer has logged off.
To allow engineer access:
1. Scroll to the GRANT ACCESS option and press SELECT (right soft
key).
2. Select the ALLOW ENGINEER option (right soft key) and select
ENABLED.
To disallow engineer/manufacturer access, follow the same path and
toggle to DISABLED and press SELECT (right soft key).
Note
Additional commands are available for X-10 functionality from the qualified installation Engineer if
the system is configured for such use.
…GRANT ACCESS…
EXIT
SELECT
UPDATED
EXIT
SELECT
…ALLOW ENGINEER…
EXIT
SELECT
…ENABLE…
EXIT
SELECT
