SigNET 200/300 User Guide
ELAB 1543
13
Enable phone number for SMS [receipt] within SMS Events menu:
1. Scroll to the SMS EVENTS option and press SELECT.
2. Select EDIT.
3. Using the up/down arrow keys, scroll to the appropriate registered number
and press SELECT.
4. Scroll to ENABLE NUMBER and press SELECT.
5. Press SELECT for ENABLED [Alternatively, press SELECT for DISABLED.]
6. Press BACK to exit the SMS EVENTS menu.
The keypad displays UPDATED once the setting has been saved.
Select Events for SMS notification within SMS Events menu:
1. Scroll to the SMS EVENTS option and press SELECT.
2. Select EDIT. Using the up/down arrow keys, scroll to the appropriate
registered number and press SELECT.
3. Using the up/down arrow keys, scroll to the REPORTED EVENTS and press
SELECT.
4. Scroll and toggle ENABLED for each Event notification desired.
Events display preceded by an asterisk.
5. Press BACK to exit the SMS EVENTS menu.
4.9.2 SMS Control
Depending on the SMS authentication configured by the installation engineer,
the user’s mode of SMS may vary.
If the system SMS Authentication is set to the SMS PIN Code or Caller ID, it
is necessary to set up SMS Control:
1. Scroll to the SMS CONTROL option and press SELECT. The following
configuration options are available:
SMS CALLER ID: Provide phone number (Requires three-digit country
code prefix)
SMS PIN CODE: Provide pin number
Delete: Remove phone number as needed
2. Press BACK to exit the SMS SETUP menu.
For a complete list of SMS Commands, refer to Table 3.
Note
Beyond User Type, Engineer settings allow specific rights for functionality to be granted to each user. If a
function explained herein does not appear on User keypad menus, the user does not have permission for
that functionality. Consult with authorised installation Engineer for appropriate rights and settings.
…SMS EVENTS…
EXIT
SELECT
…EDIT…
EXIT
SELECT
…353123123…
BACK SELECT
ENABLE NUMBER
BACK SELECT
…SMS EVENTS…
EXIT
SELECT
…EDIT…
EXIT
SELECT
…353123123…
BACK SELECT
…REPORTED EVENTS…
BACK SELECT
…ALARMS…
BACK SELECT
…SMS CONTROL…
EXIT
SELECT
…SMS CALLER ID…
EXIT
SELECT
