MAINTENANCE
G Series
Linear Hearth Burner
European
Home
.com
25
A qualified service agency should conduct an annual inspection and maintenance of your
G Series Linear
Hearth Burner
to keep it running safely. The following procedures should be performed only by a qualified
service person. The gas supply should be turned off whenever a maintenance procedure is performed. All parts
of the fireplace that are removed for servicing must be replaced prior to operation.
Cleaning the Media and Burner.
With all parts of the fireplace at room temperature, carefully remove and clean the fire media with a soft bristled
brush.
Clean the burner surface with a brush and clean the rest of the burner module, including the pilot burner, with
a vacuum cleaner. After lifting off the cover, ensure that the Primary Air Openings (shown below, at the end
of each Burner Inlet Tube) remains free of dust or debris. These openings may cleaned with a vacuum cleaner
or brush.
Primary Air Openings
Burner Inlet Tubes
Failure to keep the primary air opening of the burner clean may result in sooting
and property damage.
W
ARNING
Summary of Contents for GVF-42
Page 31: ...NOTES ...