European Home GVF-42, Installation, Operation And Owner'S Manual, Page: 21 / 32

OPERATING the BURNER
G Series Linear Hearth Burner
European
Home
.com 21
THE FIRST FIRE
The first time you light your G Series Linear Hearth Burner an odor may be given off by the unit. This is normal
and is a result of the ‘burn off’ of the lubricants and sealants used when manufacturing the appliance. We
recommend that you open the nearby windows for extra ventilation and operate the appliance for at least an
hour.
During this first fire, examine the flame for appearance and quality. Examine the burner media for sooting.
The flames should mostly yellow with blue bases. The flames should not have dark tips.
RESETTING THE SYSTEM (Pairing the Remote and Receiver)
The G Series Linear Hearth Burner should need to be reset only once, prior to initial use. This is done as
follows:
1. Press and hold the receiver reset button (shown below) until you hear the second of two beeps.
2. After the second beep release the reset button and, within twenty seconds, press the SMALL FLAME
button on the remote until you hear the second of two beeps.
RESET
BUTTON