Atop Industrial Managed Ethernet Switch
EH7510
User Manual V 1.0
33
EH7510 also supports adding static MAC address manually (Fig. 2.28); the steps are as
follows,
Step 1: Enter MAC Address. Unicast address starts with 00 and Multicast address starts
with 01.
Step 2: Specify VLAN ID.
Step 3: Decide which ports belong to its corresponding address; use
Ctrl
to add more than
one port.
Table 2.16
Label
Description
MAC address
Enter MAC address manually.
VLAN
Specify VLAN ID that this static MAC belong to
Type
-
Port(s)
Define which ports belong to this address
Add
Confirm and add the MAC address.
Remove
Remove any existing MAC address.
2.6.3 Filter MAC
Fig. 2.29.a
Fig. 2.29.b
＊
Example
＊
This function allows users to set MAC filter manually, see Fig. 2.29.a, and Fig. 2.29.b for an
example.
