Atop Industrial Managed Ethernet Switch
EH7510
User Manual V 1.0
96
Password:
(enter password here)
Switch#
To enter the “configuration” mode, you need to be in the privileged mode, and then type in
the command
“
configure
”:
Switch#
configure
Switch(config)#
Below is a graphical view of the modes and its related privileges and screen prompt:
Users may enter
“
?
”
at any command mode and the CLI will return possible commands at
that point, along with some description of the keywords:
Switch(config)#
ip ?
address Set IP address and subnet mask
default-gateway Set default gateway IP address
dns Set DNS IP address
Users may use the <Tab> key to do keyword auto completion:
Switch(config)#
syst
<
Tab
>
Switch(config)#
system
User Mode
Operator Privilege
Switch>
Privileged Mode
Manager Privilege
Switch#
Configuration Mode
Manager Privilege
Switch(config)#
