EuroMobile EH7510 User Manual Download Page 61

Page: 61 / 120

Atop Industrial Managed Ethernet Switch
EH7510
User Manual V 1.0

Table 2.32

Label

Description

Factory

Default

VID

Indicates the VLAN ID number.

Dependant

Static Member Ports

Indicates the member ports to this VID.
This entry is created by user.

All ports

Static Tagged Ports

Indicates the ports that outgoing packet is tagged or
untagged.

Displayed

: The outgoing packet is tagged from this

port.

Undisplayed

: The outgoing packet is untagged from

this port.
This entry is created by user.

Dependant

Dynamic Member Ports

Indicates the member ports to this VID.
This entry is created by GVRP.

Dependant

Dynamic Tagged Ports

Indicates the member ports that outgoing packet is
tagged or untagged.

Displayed

: The outgoing packet is tagged from this

port.

Undisplayed

: The outgoing packet is untagged from

this port.
This entry is created by GVRP.

Dependant

2.11.3 VLAN Setting

Fig. 2.45.a

Summary of Contents for EH7510

























































































































Search results

Summary of Contents for EH7510

Reviews:

Related manuals for EH7510

Brands by name

Popular brands

EuroMobile EH7510, User Manual

Search results

Summary of Contents for EH7510

Reviews:

Related manuals for EH7510

Brands by name

Popular brands