Atop Industrial Managed Ethernet Switch
EH7510
User Manual V 1.0
49
2.10.2 Spanning Tree Port
Fig. 2.41 shows how to configure per-port Spanning Tree parameters and indicate each
port
’s status.
Fig. 2.41
*NOTE:
-
Recall that Tx Packets are those transmitted/sent out from EH7510, and Rx Packets are
packets received from connected devices, then
- Des Cost:
(Designated Root) cost for a packet to travel from a port to the root in the
current Spanning Tree.
- Des Port:
(Designated Port) port designated to send the best BPDU.
- Des Root:
(Designated Root)
device’s priority from which the port must communicate to
reach the Spanning tree’s root.
- Uptime:
Indicates how long it has been up.
- Tx/Rx SPT:
sending/receiving STP packet total count.
- Tx/Rx TCN:
Topology change Notification
- Tx/Rx RSTP:
sending/receiving RSTP packet total count.
