Atop Industrial Managed Ethernet Switch
EH7510
User Manual V 1.0
31
Table 2.14
Label
Description
Group ID
EH7510 can have up to 2 trunk group. Trk1 and Trk2.
LACP (Yes/No)
Enable/Disable LACP.
Ports
Specifies the member ports. Hold
Contro
l to select more than
one port at a time.
LACP Active
Specifies which ports within the group are LACP active. Non-
selected ports would be LACP passive.
Apply
Click
Apply
to confirm changes.
Remove
Removes any existing trunk group.
2.6 Unicast/Multicast MAC
This function includes three sub-pages
MAC Address Table
Add Uni/Multicast MAC
Filter MAC
.
Multicast filtering improves the performance of networks that carry multicast traffic; this
section will explain what Multicast and Unicast are as well as their benefits, (Fig. 2.26).
- Unicast:
This type of transmission sends messages to a single network destination
identified by a unique address. This method is simple but not widely used.
- Multicast:
This type of transmission is more complicated. It sends messages from one
host to multiple hosts; only those hosts that belong to a specific multicast group will
receive the multicast. Also, networks that support multicast send only one copy of the
information across the network until the delivery path that reaches group members
diverges. At these diverging points, multicast packets will be copied and forwarded. This
method can manage high volume traffic with different destinations while using network
bandwidth efficiently.
Fig. 2.26
Multicast
Unicast
