17
www.euroklimat.it
INSTALLATION
A. Place the machine at a height that allows the operator to put in the machine holes
(A1)
the jacks installed previously in the anti-vibration
mounts.
B. Through the hole
(B1)
fix the anti-vibrating using the low nut
(E2)
interposing a broken elastic washer
(E3)
.
C. Place the machine on the support points at the same time to apply the load simultaneously on all the anti-vibration mounts. Fix the machine
level using the high nuts
(E5)
. When the unit is correctly aligned fix the nuts
(E2)
.
D. At the end of these operations the machine should be elastic on the anti-vibration mounts.
The detailed instructions for securing an
EKS machine
–
IS / BS/AS 090-3-1 2ps
are shown by way of example
A specific
“
Installation Instructions Manual
”
for the anti-vibration mounts will be supplied with every ANTI-VIBRATION kit ordered, chosen for
the special needs of the chiller purchased. See package / box containing the anti-vibration mounts.
