Euroboor B60, Operator'S Manual

Page: 9 / 48

9
WARNING
RISK OF INJURY TO HANDS
f) Do not reach into the processing line with your hands
g) Use both hands to hold and operate the machine
WARNING
DUST CREATED BY POWER GRINDING MAY HARM YOUR HEALTH
h) Some types of dust, such as dust from lead-based paint, is known to cause cancer, birth
defects or other reproductive harm. Risk varies on exposure and should always be
reduced by working in a well-ventilated area and by making use of approved safety
equipment, such as dust masks specifically designed to filter out microscopic particles
WARNING
NEVER MACHINE MATERIALS WHICH CONTAIN ASBESTOS
i) Only use recommended square carbide inserts (“cutting plates”), rated at the machine’s
maximum cutting rate or higher
j) Do not use dull or damaged cutting plates to prevent excessive friction and load, and
thus to prevent damage to and failure of the machine
k) Maintain labels and identification plates, as they carry important information. If
unreadable or missing, obtain replacement
3. TOOL USE AND CARE
WARNING
a) Hold power tool by insulated gripping surfaces, because the cutter may contact its own
cord.
Cutting a “live” wire may make exposed metal parts of the power tool “live” and
shock the operator
WARNING
b) Use clamps or another practical way to secure and support the workpiece to a stable
platform.
Holding the work by your hand or against the body leaves it unstable and may
lead to loss of control.
4. SERVICE
a) Only use original EUROBOOR parts, accessories and consumables
b) Have maintenance carried out by EUROBOOR specialists
RESIDUAL RISKS
In spite of the application of the relevant safety regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
•
Impairment of hearing
•
Risk of personal injury from flying particles
•
Risk of burns due to accessories becoming hot during operation
•
Risk of personal injury due to prolonged use.
Always try to reduce these risks as much as possible.