Euroboor B60, Operator'S Manual

Page: 21 / 48

21
3.4 Replacing milling head
3.4.1 Disassembly milling head cover
See paragraph 3.3.1.
3.4.2 Removing and reinstalling milling head
1. Use supplied 32 mm spanner to lock the motor spindle
2. Use supplied 8 mm Allen key to loosen and remove the securing bolt
3. The milling head might be clamped tightly on the motor spindle. If the milling head does not
come off easily by hand, use a pulley puller
4. For reinstallation, clean all parts first, and follow above steps in reverse order. Make sure all
parts are positioned correctly and that the securing bolt is not overtightened. Make sure to
remove all tools.
[image 2-4]
WARNING
- Shortly after operating the machine, the milling head and cutting plates can be hot
- The cutting plates are sharp
- Wear appropriate hand protection
- Be careful not to damage the milling head and cutting plates