Euroboor B60, Operator'S Manual

Page: 25 / 48

25
3.7 Conversion for use on pipe
EUROBOOR B60(S) is equipped with a guide plate assembly that can be converted for use on pipe
with an outer diameter range of 150 – 300 mm. This requires a conversion of the machine which is
done in the following steps:
1. Loosen and remove both angle adjustment lock bolts with supplied 6 mm Allen key. One can
be found at either side of the milling head cover.
2. Pull the complete guide plate assembly from the machine.
3. Rotate the guide plate assembly 180 degree.
4. Reposition the guide plate assembly.
5. Fit and tighten both angle adjustment lock bolts.
(B60S shown)
[image 2-8]