33
The parameters of alarm output are given as below:
Item
Application
Alarm output
name
Alarm output name is only for identifying an alarm output device in the net
-
work.
Alarm output
type
Output according to alarm output arming timetable, alarm output
normally on (24hrs for arming and output) and alarm output normally off.
Arming Schedule
of Alarm output
Cycling by week. Four time phases can be set up for each day.
The settings can be copied to any day in a week in a quick way.
Alarm output
delay
Manually close, 1-300s. It defaults to be closed manually.
When selecting “manually closing alarm output”, users can manually control the switch of the alarm output
via “manually closing alarm” and “manually opening alarm” buttons.
5.5. System Parameters
This menu can set up user information, advanced settings (time-zone setting, upgrading, restoring factory
defaults, and iris correction, etc.), initialize disks and view logs, etc. The functions under this menu involve in
security and require an administrator to do the setup. Special attention must be paid to avoid wrong operations
and cause devices to be malfunction.
5.5.1. User Management
Select “User settings” for users to modify the network camera administrator or operators and configure the
management permission. The administrator can add, modify, and delete user information in this interface.
Fig. 63.
