32
Fig. 61.
Parameters for alarm input settings are as below:
Item
Application
Alarm input
name
Alarm input name is only for identifying an alarm source in the network.
Alarm input type
Normally on or off for options. It defaults to be normally on.
And the alarm shall be triggered when the external alarm route is connected.
Arming
schedule of
Alarm input
Four time segments can be set up for each day and cycle by week.
Alarm linkage
The linkage when there is an alarm input can choose the methods like the device
alarm output, sending alarm to the management center, and calling the PTZ preset
points, etc. The camera of some models only supports part of the functions.
5.4.2. Alarm Output
Alarm output settings can set up the types of alarm output arming including output according to the arming
time, output normally on, and output normally off. When choosing the type of output according to the arming
time output, it is able to set up the time phases for alarm output arming.
Alarm output settings can set up the alarm output name and the delay time of alarm output after the alarm
is dismissed (It can be set between 1-300s), or manually close.
Fig. 62.
