EURA DRIVES EM30 Series, Installation & Operating Manual

Page: 48 / 72

11) Parameter group 400: Analog I/O configuration
Pulse speed reference signal input configuration:
Configuration is done in the same way, as for analogue speed reference signal. DI1 is predetermined as pulse
signal input channel. DI1 selection is done automatically, if pulse reference signal is selected as speed reference
source. Maximum input frequency: 50 kHz.
F440
Min. pulse frequency (kHz) Range: 0.00…F442 Default setting: 0.00 kHz
F441
Assignation min. frequency Range: 0.00…F443 Default setting: 1.00
F442
Max. pulse frequency (kHz) Range: F440…50.00 kHz Default setting: 10.00 kHz
F443
Assignation min. frequency Range: Max
（
1.00
，
F441
）
…2.00 Default setting: 2.00
F445
Filter factor pulse input Range: 0…100 Default setting: 0
F446
0 Hz dead-band Range: 0…+/- F442 Default setting: 0.00
Range configuration and dead band selection will be done in the same way, as for analogue input signals
Non-linear characteristic for analogue channels
A non-linear characteristic can be assigned to analogue input channels AI1 and AI2 . Programming is done in
sense of the table below
F460
Characteristic AI1
Selection: 0=linear
1=non-linear Default setting: 0
F461
Characteristic AI2
Selection: 0=linear
1=non-linear
Default setting: 0
F462
input level 1 for AI1 Range: F400 - F464 Default setting: 2.00V
F463
Assignation input level 1 (%) Range: F401 - F465 Default setting: 1.20
F464
input level 2 for AI1 Range: F462 - F466 Default setting: 5.00V
F465
Assignation input level 2 (%) Range: F463 - F467 Default setting: 1.50
F466
input level 3 for AI1 Range: F464 - F402 Default setting: 8.00V
F467
Assignation input level 3 (%) Range: F465 - F403 Default setting: 1.80
F468
input level 1 for AI2 Range: F406 - F470 Default setting: 2.00V
F469
Assignation input level 1 (%) Range: F407 - F471 Default setting: 1.20
F470
input level 2 for AI2 Range: F468 - F472 Default setting: 5.00V
F471
Assignation input level 2 (%) Range: F469 - F473 Default setting: 1.50
F472
input level 3 for AI2 Range: F470 - F412 Default setting: 8.00V
F473
Assignation input level 3 (%) Range: F471 - F413 Default setting: 1.80
100
Assignation of intermediate pints, in the same way as for endpoints
(0= -100%, 1=0%, 2=+100%)
F400
A1 A2 A3
F402
EM30 – Rev.03 -EN- SOFT Rev. 1.1x
© 2017-06-KPP-EURADRIVES EUROPE GmbH
- 46 -