U2829 Series Operation Manual Chapter 4 [SYSTEM] and [FILE]
48
4.2
LCR <FILE MANAGE>
U2829 series instrument can save the user-set parameter to the nonvolatile
memory in the form of file, so when use the same setting next time user can load
a corresponding file to obtain the parameter set and used last time. By doing so,
it can save the time of setting parameter and improve the production efficiency.
The file manage function of the transformer scanning will be described in the part
of transformer test setting.
Press [FILE] to enter into the file manage page, shown as below.
U2829402
4.2.1
Setup file for single-group component (*.STA)
100 groups of different single groups of component set file (*.LCR file) can be
saved in the instrument, but the *.LCR file with the number more than 100 should
be saved in external U-disc (note: U-disc is an optional accessory).
Use
FILE
function on the following File menus, the following data will be saved or
loaded in the form of file, which are called *.STA file.
Control and setting parameter on <MEASURE SETUP> page
FUNC A-B
FUNC C
FUNC D
FREQ
LEVEL
RANGE
SPEED