U2829 Series Operation Manual Chapter 2 Introduction
8
measurement display page, the following soft keys will be displayed in the soft
key zone.
<MEAS DISPLAY>
<BIN DISPLAY>
<PASS FAIL>
<LIST SWEEP>
<GRAPH SWEEP>
When the transformer measurement function is active, press this key-
[MEAS]
,
the following soft keys will be displayed on the transformer measurement display
page.
< MEAS DISP>
<JUDGE DISP>
<MEAS SETUP>
<LIMIT SETUP>
When the transformer scan function is active, press this key-
[MEAS]
, the
following soft keys will be displayed on the transformer scan display page.
<LOAD STD.>
<DEVIATION>
<SPEED>
<PRI.1>
<TEST FAIL>
2.4.2
[SETUP]
When the LCR function is active, press this key
-[SETUP]
, the following soft keys
will be displayed in the soft key zone on the LCR measurement setup page.
<MEAS SETUP>
<CORRECTION>
<LIMIT TABLE>
<LIST SETUP>
<GRAPH SETUP>
When the transformer measurement function is active, press this key
-[SETUP]
,
the following soft keys will be displayed on the transformer measurement setup
page.
<MEAS SETUP>
<LIMIT SETUP>
<CORRECTION>
<MEAS DISP>
<JUDGE DISP>
When the transformer scan function is active, press this key
-[SETUP]
, the
following soft keys will be displayed on the transformer scan setup page.
<TRANS ID>
<PIN SETUP>
<TEST CONDITION>
