U2829 Series Operation Manual Chapter 3 Introduction to [DISP]
22
below this item are the sweep results.
3.3.4
COMP (Compare)
This zone indicates the compare results of the currently swept points. L means
the result is lower than the standard and H is higher than the standard, while
blank is medium.
3.4
<MEASURE SETUP>
Press
[SETUP]
to enter into the
<MEAS SETUP>
page shown as below:
U2829306
In this page, the following control parameters can be set. (Items in parenthesis
can be set)
Test function (
FUNC A-B
)
Test function (
FUNC C
)
Test function (
FUNC D
)
Test frequency (
FREQ
)
Test level (
LEVEL
)
Test range
(RANGE
)
Test speed (
SPEED
)
DC Bias (
DC BIAS
)
DC Voltage Source (
DC SOUR
)
Trigger Mode (
TRIG
)
Auto Level Control (
ALC
)
Delay Time (
TRIG DLY
)
