27971-01A
39
Troubleshooting
Problem
Solution
My bed, connected to a T-Max®
Manager, did not display “dL” but
does indicate:
- “0:00”
- a tanning time and the lamps
have come on
- a tanning time but the lamps
have not come on
When auto-addressing the first
bed does not register an address
1. Remote device has not been set.
2. The sunbed has not been connected to the remote system, see
Remote Connections
.
1. Delay time of T-Max® Manager has not been set.
2. Delay time has expired and session has begun.
Auto start function of T-Max® Manager has been turned off.
Press the START button to turn on lamps.
When using the auto address feature of the T-Max® Manager
you must wait 10 seconds from the time you start the auto
address function before addressing the first bed.