27971-01A
30
Using Your Sunbed
When used as a stand alone unit or when connected to a remote system using a control relay.
1.
Lift canopy, lie down on bench (face up),
lower canopy toward your body. See
Safety Information
for positioning require-
ments.
2.
Put on your safety goggles.
3.
Press the START button (A) to begin the
tanning session. The lamps will turn on
and the timer will begin to count down.
4.
If a tanning time less than the displayed
time is desired, repeatedly press the
START button (A) to decrease the remain-
ing time.
5.
When the timer reaches 0 the lamps turn off.
If you want to interrupt your session before
time expires, press the STOP button (F).
6.
Raise the canopy by using the canopy han-
dle, do not push up on the acrylic shield.
The cooling fans run for a period of time
after the lamps shut off to aid in cooling
the sunbed.
WARNING
Wear protective eyewear.
Failure to may result in severe burns or
longterm injury to the eyes.
A START button
- Turns unit on. Timer
display shows remaining time. If a
lesser time is desired, press START
button until desired time is displayed.
B Face tanner button
- Turns face tanner
on and off. Display shows status.
C Shoulder tanner button
- Turns shoul-
der lamps on and off. Display shows
status.
D Timer display
- Displays remaining time
and function status.
E Body fan buttons
- Adjusts body cool-
ing. Timer display shows intensity (1-
2-3).
F STOP button
- Interrupts tanning session.
A
B
C
D
E
F
Operation - Using Your Sunbed