Images are for illustrative purposes.
We reserve the right to make changes.
RDT-59-0322
23
®
NORD
canopy
|
EOZ installation guide
Assign unique addresses to OZ modules
For this procedure a narrow 2mm flat-head screwdriver will be needed. All Ozone Modules connected to a single
Control Panel must have a unique device address.
Example:
Ozone Module
one
(Address 1):
Switch 1x = 1
Switch 10x = 0
Ozone Module
thirteen
(Address 13):
Switch 1x = 3
Switch 10x = 1
Mounting OZ modules back into the EOZ chassis
After all device addresses have been set to their unique values, proceed with reinstalling the Ozone Modules.
Carefully lift each Ozone Module into place, securely attaching the loose end of the hanging pressure measurement
hose back onto its nipple inside the EOZ 100mm exhaust hole. Raise the module into place and secure the four
(4) fixing clamps to fasten the module inside the chassis, ensuring the hose does not become kinked in the
process.
00
55
1 1
2 2
33
44
66
77
8 8
9 9
1x
10x
4x
