Images are for illustrative purposes.
We reserve the right to make changes.
RDT-59-0322
3
®
NORD
canopy
|
EOZ installation guide
Safety notes
This manual consists of important information on the instruction and safety of External Ozone Cleaning System.
Read this manual carefully before installing, commissioning, or performing maintenance or repair work on the
system.
• Always wear appropriate protective clothing when handling the equipment.
• External Ozone Cleaning System is intended only for the treatment of exhaust air as described in these
instructions.
• External Ozone Cleaning System uses high voltage to create an electric charge that generates ozone
(O₃). Ozone significantly reduces odor, grease, mold and bacteria. ETS NORD AS disclaims any liability
in the case that the product is not used in accordance with the manufacturer’s instructions contained in
this manual.
Installation flowchart
For ease of installation and service, it is suggested the installing contractor have the following tools and
components on hand:
• Narrow 2mm flat-head screwdriver
• #1 Phillips screwdriver
• T4 screwdriver
• Silicone gun
• Silicone
• Rivet gun
• Stainless steel rivets
• M8 threaded rod
• M8 nuts
Check the
product
shipment
Mount EOZ
Connect
pressure
measure-
ment tubes
Mount Control
Panel
Connect
supply
mains for
control
panel and
EOZ
Perform
electrical
installation
of the
system
Connect
data wiring
for control
panel and
EOZ
Measure the
airflow
Setting
Ozone
Module
addresses
(in case of
multiple EOZ)
Report the
possibility of
commissio-
ning
