Installation Instructions
SKU 200290/200291
Date: 2015-12-14
Version 1.0
LEDLUX EXHAUST FAN AND LIGHT
SKU# 200280, 200281
Rated Voltage 220-240V~ 50Hz
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow
all instructions carefully before using the product. Please keep instructions for future reference.
Warranty
This light fitting is covered by a 3 year warranty. Please retain proof of purchase and evidence of installation
by a licensed electrician.
Warranty will be void if there is any damage due to improper usage or modification to the fitting.
Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void
warranty.
General Safety Warnings!
This product must be installed by a licensed and qualified electrician to comply with Australian and New
Zealand regulations relating to AS/NZS 3000:2007/Amendment 2:2012 Electrical installations.
WARNING: FOR SAFE USE OF THIS APPLIANCE, MEANS FOR ALL-POLE DISCONNECTION MUST
BE INCORPORATED IN THE FIXED WIRING IN ACCORDANCE WITH THE WIRING RULES.
This is a
requirement of clause 7.12.2 of the
household appliance
Standard
AS/NZS 60335.1-2011
or the latest
standard*
Please note warranty will be void if installed without a mean for all-pole disconnection included
in the wiring.
Use this exhaust fan in accordance to instructions outlined in this manual.
Ensure power is turned off before installation.
The appliance is not to be used by persons, including children, with reduced physical, mental or sensory
capabilities, or lack of knowledge and understanding, unless they are supervised and or given instruction
concerning the use of the appliance by someone responsible for their safety.
This appliance is not a toy. Children should be supervised to ensure that they do not play with the appliance.
Installation WARNING
1. This exhaust fan is not intended or mounting in outside windows or walls.
2. The unit should be mounted outside the shower cubicle.
3. Installation is to be no less than 2.1 metres from the floor.
4. Appliance must be installed in a flat ceiling. Do not install on a sloped ceiling, or vertically.
5. This appliance shall, under no circumstances, be covered with insulating material or similar material.
6. Before commencing any cutting, check in the ceiling space that there are no obstructions such as ceiling joists
and that there is sufficient height clearance for the housing.
7. Check that the electrical wiring can be routed from the wall switches to the mounting location.
8. Precautions must be taken to avoid the back-flow of gases into the room from the open flue of gas or other
fuel-burning appliances
