eTIGER ES-K1A, Manual

Page: 21 / 160

21
EN
Problem Cause Solution
No response from
the control panel
when operating on
the keypad.
The keypad is not
registered in the control
panel.
Register the keypad in the
control panel by following the
instructions in this manual.
The keypad is installed
too far from the control
panel.
Install the keypad and the
control panel closer to each
other.
It is recommended to buy
a repeater to extend the
transmission distance.
Cannot disarm the
system by RFID tag.
The RFID tags have not
been registered in the
keypad.
Register the RFID tag in the
control panel according to the
instructions in this manual.
The RFID reader is
disabled.
Enter Setup mode and activate
the function “Enable / Disable
deactivation by RFID tag”.
The keypad is locked. Press Arm or Home Mode, then
[ * ] before disarming.
The keypad cannot
be set up.
The keypad is not
unlocked.
Refer to instructions in this
manual.
The keypad does not
switch to Setup mode.
Refer to instructions in this
manual.
The keypad cannot
arm, disarm or
switch to Home
Mode.
Your user code or admin
code has not been typed
before each operation.
Type your user code or admin
code before the operation.