ETI 004656570, Technical Manual Of Installation

Page: 13 / 16

13 / 16
12 - TECHNICAL DATA:
Supply Circuit 96x96 - Model 144x144 - Model
Supply Voltage 230/400V~ 230/400V~
Operating Limits - 15%…+10% Ue - 15%…+10% Ue
Rated Frequency 50 or 60Hz 50 or 60Hz
Power Consumption L/L - 400V
5.8 VA 6.1 VA
Immunity time for Microbreakings <6ms <6ms
Measurement/Overvoltage Category Class II Class II
Current Input 96x96 - Model 144x144 - Model
Rated Current 5A 5A
Operating Limits 0.125…5.5A 0.125…5.5A
Rated Voltage 230V~ 230V~
Overload Capacity 1.1Ie 1.1Ie
Overload Peak 10 Ie for 1sec 10 Ie for 1sec
Measurement/Overvoltage Category Class II Class II
Reading and Control Range 96x96 - Model 144x144 - Model
Voltage Reading Limits 195...460 V 195...460 V
Current Reading Limits 0.125…5.5A 0.125… 5.5A
Type of Current and Voltage Readings TRMS TRMS
Cos
M
Adjustment
0.85 inductive…0.95 capacitive 0.85 inductive…0.95 capacitive
Tripping Sensitivity 5…600 s/step 5…600 s/step
Re-connection Time of the Same Step 1…600 seconds 1…600 seconds
FFT - Harmonic Spectrum THD% - 64st THD% - 64st
Relay Outputs 96x96 - Models 144x144 - Model
Number of Outputs 04 - 06 04 - 06 - 08 - 12
Contact Arrangement 1NO 1NO
Contacts Capacity 8A – 250V (AC1) 8A – 250V (AC1)
Maximum Capacity the Common Contacts 10A 10A
Insulating Category/Rated Voltage
VDE0110
C/250 - B/400 C/250 - B/400
Maximum Switching Voltage
250V 250V
Electrical Contact Life 20 x 10
6
ops 20 x 100
6
ops
Mechanical Contact Life 100 x 10
3
ops 100 x 10
3
ops
Enclosure and Connections 96x96 - Model 144x144 - Model
Cable Type for connection Only 90°C - 1.5/2.5mm
2
- 16/14 AWG Only 90°C - 1.5/2.5mm
2
- 16/14 AWG
Enclosure Version Flush mount 96x96 Flush mount 144x144
Temperature Work -10 / +50 °C -10 / +50 °C
Operating Altitude Up to 2000m Up to 2000m
Pollution Degree 2 2
Electrical Insulation – Mains/Contact 4 kV 4 kV
Protection Degree IP41 Front - IP20 Terminals IP41 Front - IP20 Terminals
Relative Humidity w/o Condensation 95 RH% 95 RH%
Dimensions 96 x 96 x 74mm 149 x 149 x 60mm
Weight 350g - 370g 520g - 540g - 650g - 700g
Serial Interface 96x96 - Model 144x144 - Model
TTL Standard Standard
Communication Protocol Proprietary / MODBUS RTU Proprietary / MODBUS RTU
Connector Type RJ11 RJ11
Serial Adapter TTL / USB / 485 ALL MODELS
Connector RJ11 / USB / 485 Optional order code SCUSB485
EC Directives: - 2006/95/EC - Low Voltage
- 2004/108/EC - EMC
Norms Compliance: CE marking
- IEC EN 55022 - IEC EN 61000-4-2 - IEC EN 61000-4-3 - IEC EN 61000-4-4 - IEC EN 61000-4-5
- IEC EN 61000-4-6 - IEC EN 61000-4-11 - IEC EN 61000-6-2 - IEC EN 61000-6-4 - IEC EN 61010-1
- IEC EN 61010-2-030
ETI Elektroelement d.d. - Slovenija
Tel.: 03/56-57-570- Fax: 03/56-74-077
www.eti.si - eti@eti.si