IR1759-MK5-AT3130-EDCONT MINIRAY
TE Connectivity - Aerospace, Defence & Marine
/// Application Tooling
Page
9
of
36
2.3 System Description continued
The IR1759-MK5 MINIRAY Hand Tool
The mains supply to the controller is connected through a standard, (IEC) mains socket on the rear
panel. This socket has an integral ON/OFF switch (Fig1). Both live and neutral lines are fused
protected at the connector.
Fig1 Fig 2 Fig 3
MINIRAY Hand Tool Connector –
The output connection is a male 6-pin socket on the rear panel. Fig 2
The input connection is a 6-pin ‘female’ plug at the end of the supply lead. The plug is fitted with a
locking ring and is connected to the output socket. As shown in Fig 3
Note: IR1759-MK5-AT3130-EDCONT should not be connected to other Controllers except the
one supplied
.
CAUTION
To avoid burns, the front reflector should not be touched when the tool is in
